LT2156E to wysokowydajny interfejs człowiek–maszyna (HMI) wyposażony w panoramiczny 15,6-calowy wyświetlacz TFT o rozdzielczości Full HD 1920×1080, zapewniający wyraźny i ostry obraz, idealny do zastosowań przemysłowych.
Panel dotykowy LT2156E o przekątnej 15,6" został zaprojektowany z myślą o łatwej integracji; obsługuje szeroki zakres obsługiwanych trybów sterowania, w tym Modbus, TCP/IP i OPC, co czyni go kompatybilnym ze sterownikami PLC, kontrolerami ruchu i innymi urządzeniami polowymi.
LT2156E doskonale sprawdza się w systemach SCADA, pulpitach produkcji inteligentnej, interfejsach automatyki maszyn oraz w aplikacjach IIoT, gdzie niezawodność i łatwość obsługi są kluczowe.
Wyświetlacz: 15,6" Full HD (1920×1080) TFT.
Ekran dotykowy: 4-przewodowy rezystancyjny, przemysłowy.
Interfejsy: RS232/RS485/RS422, Ethernet, USB, opcjonalnie CAN.
Procesor: Przemysłowy ARM Cortex-A8 1 GHz.
Pamięć: 256 MB Flash + 512 MB DDR3, z obsługą kart SD i USB.
Zasilanie: 24 VDC.

SK08 - shaft support for reliable mounting of shafts perpendicular to mounting surface.

Cross references:
R1055 008 00 (Rexroth).
FGWA8 (FLI).

Shaft diameter: 8 mm.
Type: Flanged shaft end support.
Material: Anodized aluminum.
Application: CNC machines, 3D printers, and laser engravers.
Mounting:
- Pre-drilled holes for standard M4/M5 mounting bolts.
- Secure shaft clamping mechanism.
- Designed for precise linear guide rail systems.

SHF60 – shaft supporter flange type.

Cross references:
SHF60 (NB)

Shaft diameter: 60 mm.
Type: linear shaft support.
Material: Aluminum.
Mounting:
- Locking bolts M12.
- Clamping bolts M12.

SHF50 – shaft supporter flange type.

Cross references:
SHF50 (NB)
SHF50 (FLI)

Shaft diameter: 50 mm.
Type: linear shaft support.
Material: Aluminum.
Mounting:
- Locking bolts M12.
- Clamping bolts M12.

SHF40 – shaft supporter flange type.

Cross references:
SHF40 (NB)
SHF40 (FLI)

Shaft diameter: 40 mm.
Type: linear shaft support.
Material: Aluminum.
Mounting:
- Locking bolts M10.
- Clamping bolts M10.

SHF35 – shaft supporter flange type.

Cross references:
SHF35 (NB)
SHF35 (FLI)

Shaft diameter: 35 mm.
Type: linear shaft support.
Material: Aluminum.
Mounting:
- Locking bolts M8.
- Clamping bolts M10.

SHF30 – shaft supporter flange type.

Cross references:
SHF30 (NB)
SHF30 (FLI)

Shaft diameter: 30 mm.
Type: linear shaft support.
Material: Aluminum.
Mounting:
- Locking bolts M6.
- Clamping bolts M8.

SHF25 – shaft supporter flange type.

Cross references:
SHF25 (NB)
SHF25 (FLI)

Shaft diameter: 25 mm.
Type: linear shaft support.
Material: Aluminum.
Mounting:
- Locking bolts M5.
- Clamping bolts M6.

SHF20 – shaft supporter flange type.

Cross references:
SHF20 (NB)
SHF20 (FLI)

Shaft diameter: 20 mm.
Type: linear shaft support.
Material: Aluminum.
Mounting:
- Locking bolts M5.
- Clamping bolts M6.

SHF16 – shaft supporter flange type.

Cross references:
SHF16 (NB)
SHF16 (FLI)

Shaft diameter: 16 mm.
Type: linear shaft support.
Material: Aluminum.
Mounting:
- Locking bolts M4.
- Clamping bolts M5.

SHF13 – shaft supporter flange type.

Cross references:
SHF13 (NB)

Shaft diameter: 13 mm.
Type: linear shaft support.
Material: Aluminum.
Mounting:
- Locking bolts M4.
- Clamping bolts M5.

SHF12 – shaft supporter flange type.

Cross references:
SHF12 (NB)
SHF12 (FLI)

Shaft diameter: 12 mm.
Type: linear shaft support.
Material: Aluminum.
Mounting:
- Locking bolts M4.
- Clamping bolts M5.

SHF10 – shaft supporter flange type.

Cross references:
SHF10 (NB)
SHF10 (FLI)

Shaft diameter: 10 mm.
Type: linear shaft support.
Material: Aluminum.
Mounting:
- Locking bolts M4.
- Clamping bolts M5.

SK60 - shaft support for reliable mounting of shafts perpendicular to mounting surface.

Cross references:
R1055 060 00 (Rexroth)
FGWA60 (FLI)

Shaft diameter: 60 mm.
Type: Flanged shaft end support.
Material: Anodized aluminum.
Application: CNC machines, 3D printers, and laser engravers.
Mounting:
- Pre-drilled holes for standard M12/M12 mounting bolts.
- Secure shaft clamping mechanism.
- Designed for precise linear guide rail systems.

SK50 - shaft support for reliable mounting of shafts perpendicular to mounting surface.

Cross references:
R1055 050 00 (Rexroth)
FGWA50 (FLI)
GW50(INA)

Shaft diameter: 50 mm.
Type: Flanged shaft end support.
Material: Anodized aluminum.
Application: CNC machines, 3D printers, and laser engravers.
Mounting:
- Pre-drilled holes for standard M12/M12 mounting bolts.
- Secure shaft clamping mechanism.
- Designed for precise linear guide rail systems.

SK40 - shaft support for reliable mounting of shafts perpendicular to mounting surface.

Cross references:
R1055 040 00 (Rexroth)
FGWA40 (FLI)
GW40(INA)

Shaft diameter: 40 mm.
Type: Flanged shaft end support.
Material: Anodized aluminum.
Application: CNC machines, 3D printers, and laser engravers.
Mounting:
- Pre-drilled holes for standard M8/M10 mounting bolts.
- Secure shaft clamping mechanism.
- Designed for precise linear guide rail systems.

SK35 - shaft support for reliable mounting of shafts perpendicular to mounting surface.

Shaft diameter: 35 mm.
Type: Flanged shaft end support.
Material: Anodized aluminum.
Application: CNC machines, 3D printers, and laser engravers.
Mounting:
- Pre-drilled holes for standard M8/M10 mounting bolts.
- Secure shaft clamping mechanism.
- Designed for precise linear guide rail systems.

SK30 - shaft support for reliable mounting of shafts perpendicular to mounting surface.

Cross references:
R1055 030 00 (Rexroth)
FGWA30 (FLI)
GW30(INA)

Shaft diameter: 30 mm.
Type: Flanged shaft end support.
Material: Anodized aluminum.
Application: CNC machines, 3D printers, and laser engravers.
Mounting:
- Pre-drilled holes for standard M6/M8 mounting bolts.
- Secure shaft clamping mechanism.
- Designed for precise linear guide rail systems.

SK25 - shaft support for reliable mounting of shafts perpendicular to mounting surface.

Cross references:
R1055 025 00 (Rexroth)
FGWA25 (FLI)
GW25(INA)

Shaft diameter: 25 mm.
Type: Flanged shaft end support.
Material: Anodized aluminum.
Application: CNC machines, 3D printers, and laser engravers.
Mounting:
- Pre-drilled holes for standard M6/M6 mounting bolts.
- Secure shaft clamping mechanism.
- Designed for precise linear guide rail systems.

SK20 - shaft support for reliable mounting of shafts perpendicular to mounting surface.

Cross references:
R1055 020 00 (Rexroth)
FGWA20 (FLI)
GW20(INA)

Shaft diameter: 20 mm.
Type: Flanged shaft end support.
Material: Anodized aluminum.
Application: CNC machines, 3D printers, and laser engravers.
Mounting:
- Pre-drilled holes for standard M5/M6 mounting bolts.
- Secure shaft clamping mechanism.
- Designed for precise linear guide rail systems.

SK16 - shaft support for reliable mounting of shafts perpendicular to mounting surface.

Cross references:
R1055 016 00 (Rexroth)
FGWA16 (FLI)
GW16(INA)

Shaft diameter: 16 mm.
Type: Flanged shaft end support.
Material: Anodized aluminum.
Application: CNC machines, 3D printers, and laser engravers.
Mounting:
- Pre-drilled holes for standard M4/M5 mounting bolts.
- Secure shaft clamping mechanism.
- Designed for precise linear guide rail systems.

SK13 - shaft support for reliable mounting of shafts perpendicular to mounting surface.

Shaft diameter: 13 mm.
Type: Flanged shaft end support.
Material: Anodized aluminum.
Application: CNC machines, 3D printers, and laser engravers.
Mounting:
- Pre-drilled holes for standard M4/M5 mounting bolts.
- Secure shaft clamping mechanism.
- Designed for precise linear guide rail systems.

SK12 - shaft support for reliable mounting of shafts perpendicular to mounting surface.

Cross references:
R1055 012 00 (Rexroth)
FGWA12 (FLI)
GW12(INA)

Shaft diameter: 12 mm.
Type: Flanged shaft end support.
Material: Anodized aluminum.
Application: CNC machines, 3D printers, and laser engravers.
Mounting:
- Pre-drilled holes for standard M4/M5 mounting bolts.
- Secure shaft clamping mechanism.
- Designed for precise linear guide rail systems.

SK10 - shaft support for reliable mounting of shafts perpendicular to mounting surface.

Cross references:
GW10(INA)

Shaft diameter: 10 mm.
Type: Flanged shaft end support.
Material: Anodized aluminum.
Application: CNC machines, 3D printers, and laser engravers.
Mounting:
- Pre-drilled holes for standard M4/M5 mounting bolts.
- Secure shaft clamping mechanism.
- Designed for precise linear guide rail systems.

SCE30LUU linear ball bearing bushing is designed to ensure smooth and precise linear motion, minimize friction, and extend operational service life.

Cross references:
SCE30WUU (SAMICK)

Inner Diameter: 30 mm
Highth (F): 59,5 mm.
Width (W): 78 mm.
Length (L): 154 mm.
Clamping bolts (S): M8.

SCE25LUU linear ball bearing bushing is designed to ensure smooth and precise linear motion, minimize friction, and extend operational service life.

Cross references:
SCE25WUU (SAMICK)

Inner Diameter: 25 mm
Highth (F): 51,5 mm.
Width (W): 76 mm.
Length (L): 136 mm.
Clamping bolts (S): M8.

SCE20LUU linear ball bearing bushing is designed to ensure smooth and precise linear motion, minimize friction, and extend operational service life.

Cross references:
SCE20WUU (SAMICK)

Inner Diameter: 20 mm
Highth (F): 41 mm.
Width (W): 54 mm.
Length (L): 106 mm.
Clamping bolts (S): M6.

SCE16LUU linear ball bearing bushing is designed to ensure smooth and precise linear motion, minimize friction, and extend operational service life.

Cross references:
SCE16WUU (SAMICK)

Inner Diameter: 16 mm
Highth (F): 38,5 mm.
Width (W): 50 mm.
Length (L): 89 mm.
Clamping bolts (S): M5.

SCE12LUU linear ball bearing bushing is designed to ensure smooth and precise linear motion, minimize friction, and extend operational service life.

Cross references:
SCE12WUU (SAMICK)

Inner Diameter: 12 mm
Highth (F): 30 mm.
Width (W): 44 mm.
Length (L): 77 mm.
Clamping bolts (S): M5.

SCE50UU linear ball bearing bushing is designed to ensure smooth and precise linear motion, minimize friction, and extend operational service life.

Cross references:
SCE50UU (SAMICK)
SMA50GUU (Nippon bearing)

Inner Diameter: 50 mm
Highth (F): 102 mm.
Width (W): 122 mm.
Length (L): 110 mm.
Clamping bolts (S): M10.

SCE40UU linear ball bearing bushing is designed to ensure smooth and precise linear motion, minimize friction, and extend operational service life.

Cross references:
SCE40UU (SAMICK)

Inner Diameter: 40 mm
Highth (F): 78 mm.
Width (W): 102 mm.
Length (L): 90 mm.
Clamping bolts (S): M10.

SCE35UU linear ball bearing bushing is designed to ensure smooth and precise linear motion, minimize friction, and extend operational service life.

Cross references:
SCE35UU (SAMICK)

Inner Diameter: 35 mm
Highth (F): 68 mm.
Width (W): 90 mm.
Length (L): 80 mm.
Clamping bolts (S): M8.

SCE30UU linear ball bearing bushing is designed to ensure smooth and precise linear motion, minimize friction, and extend operational service life.

Cross references:
SCE30UU (SAMICK)

Inner Diameter: 30 mm
Highth (F): 59,5 mm.
Width (W): 78 mm.
Length (L): 76 mm.
Clamping bolts (S): M8.

SCE25UU linear ball bearing bushing is designed to ensure smooth and precise linear motion, minimize friction, and extend operational service life.

Cross references:
SCE25UU (SAMICK)

Inner Diameter: 25 mm
Highth (F): 51,5 mm.
Width (W): 76 mm.
Length (L): 67 mm.
Clamping bolts (S): M8.

SCE20UU linear ball bearing bushing is designed to ensure smooth and precise linear motion, minimize friction, and extend operational service life.

Cross references:
SCE20UU (SAMICK)

Inner Diameter: 20 mm
Highth (F): 41 mm.
Width (W): 54 mm.
Length (L): 53 mm.
Clamping bolts (S): M6.

SCE16UU linear ball bearing bushing is designed to ensure smooth and precise linear motion, minimize friction, and extend operational service life.

Cross references:
SCE16UU (SAMICK)

Inner Diameter: 16 mm
Highth (F): 38,5 mm.
Width (W): 50 mm.
Length (L): 44 mm.
Clamping bolts (S): M5.